primary mirror

The scheme design of large telescope primary mirror

大型望远镜主镜方案设计

Study on the thermal optics property of primary mirror applied on a space telescope

空间望远镜主镜的热光学特性分析

The light source is located at the center of vertex curvature of the primary, and the coefficients of dummy surface are deduced from primary mirror.

用法线模拟反射面代替主镜时，光源位于主镜顶点曲率中心，模拟面的系数由主镜参数决定。

On-Orbit Position Error Correction of Segmented Primary Mirror of High-Resolution Space Telescope

高分辨率空间望远镜分块主镜位置误差的在轨校正

Material selecton and blank design for 4.3m telescope primary mirror

4.3m望远镜主镜材料选择与镜坯设计

Step 2 : Aim the eyepiece at the center of the primary mirror.

把目镜中轴调整到主镜的中央.

The technology of the concave hyperbolic primary mirror of the effective aperture 2.16 m astronomical telescope

通光口径2.16m天文望远镜凹双曲面主镜的磨制工艺

Modeling and surface control of segmented primary mirror for a space-based telescope

空间望远镜分块式主镜建模与面形控制方法

The technology of chemical spray silver for primary mirror of the 2. 16M optical telescope

2.16M天文光学望远镜主镜化学喷银技术

The E-ELT's gigantic 39-meter-wide primary mirror will capture 15 times more light than any existing optical telescope, and its images should be 16 times sharper than the Hubble Space Telescope's.

这台宽为39米的大家伙，其主镜聚光能力是世界上现有最清晰的光学望远镜的15倍，形成的图片是哈勃望远镜的16倍。

Optimum Analysis of Seidel Aberrations Calculated with Zernike Circle Polynomials for the Obscured Aspherical Primary Mirror

中心遮拦非球面主镜Seidel像差拟合分析的优化

These show that the technology of primary mirror, the fabricate on and test of the second mirror, the design of the fused quartz field corrector, the select of the fused quartz material and its fabricating method, the alignment of the optical system are successful.

说明主镜的加工工艺是成功的，同时也说明凸双曲面副镜的加工、检验[2]，熔石英像场改正镜的设计[1]、选料、加工[3]及光学系统的调整[4]也是成功的。

Modeling of Segmented Primary Mirror Surface Control System for Space-based Telescope

空间望远镜分块式主镜面形控制系统建模

Optimize and redesign the primary mirror supporting system of space solar telescope

空间太阳望远镜主镜支撑结构的优化设计

The method and the result to solve the initial structural parameters by means of the primary aberration theory of an on-axis three-mirror system are given.

第三章简要介绍二次曲面和自由曲面的定义；然后，给出利用共轴三反射镜系统初级像差理论，求解初始结构参数的方法和结果。

The methods of specification, analysis and evaluation on telescope primary mirror figure error have an important instructive meaning to mirror fabrication.

望远镜主镜面形误差的指标制定、分析以及评价方法对主镜加工具有重要的指导意义。

The surface shape accuracy of the primary mirror can be greatly improved through raising the machining testplate accuracy and using the combined processing mirror surface.

提高加工基准的精度，并采用组合加工镜面，可以大大提高主镜的面形精度。